GPIB Serial Interface Boards

ICS's GPIB to Serial Interface boards are designed for in-chassis applications. Select boards with transparent data transfer or boards with smart firmware that can add an IEEE-488.2 interface to any serial device

Model 4804B GPIB Serial Interface

4804B Data Sheet
4804B Datasheet
4804B GPIB to Serial Board • Provides RS-232C single-ended and RS-422/RS-485 differential serial signals.

• Functions as a GPIB-to-Serial Interface (G-Mode) or as a Serial-to-GPIB Controller for a single device (S-Mode).

• Over 600 Kbytes/second GPIB data transfer rate.

• Transparent data transfer.

• GPIB Address can be set by SCPI commands, by an external rocker switch or by a serial command.

• On board voltage regulator for operation from 5 to 15 Vdc power.

• Dual GPIB headers support GPIB connections with a GPIB Connector/Address Switch Assembly or with a GPIB Flat Ribbon Cable.

See also
GPIB Connector/
Address Switch Cables

GPIB Accessories


   

Model 4806 Smart GPIB Serial Interface Board

4806 Data Sheet
4806 Datasheet
4806 Smart GPIB to Serial Interface board • Provides GPIB-to-serial and serial-to-serial data paths for serial devices with RS-232 signals.

• Provides all IEEE-488.2 functions and the Status Reporting Structure.

• Smart firmware automatically passes GPIB data to serial device.

• SCPI commands set serial configuration, GPIB address and user's IDN message.

• On board voltage regulator for operation from 5 to 15 Vdc power.

• Rear panel mounting eliminates cables.

See also
GPIB Accessories


   

Model 4808 Smart GPIB Serial Interface Board

4808 Data Sheet
4808 Data Sheet
4808 smart GPIB to RS-485 Interface Board • Provides smart GPIB-to-serial path for serial devices with
RS-232, RS-422 or RS-485 signals.

• Provides all IEEE-488.2 functions and the Status Reporting Structure.

• Smart firmware automatically passes GPIB data to serial device.

• SCPI commands set serial configuration, GPIB address and user's IDN message.

• On board voltage regulator for operation from 5 to 15 Vdc power.

• Rear panel mounting eliminates cables.

See also
GPIB Accessories


   

Model 4816 Smart GPIB Serial Interface Board

4816 Data Sheet
4816 Data Sheet
4816 smart GPIB to serrial interface board • Provides GPIB-to-serial and RS-232-to-RS-485 conversion path for serial devices with RS-485 signals.

• Provides all IEEE-488.2 functions and the Status Reporting Structure.

• Smart firmware automatically passes GPIB data to serial device.

• SCPI commands set serial configuration, GPIB address and user's IDN message.

• On board voltage regulator for operation from 5 to 15 Vdc power.

• Dual GPIB headers support GPIB connections with a GPIB Connector/Address Switch Assembly or with a GPIB Flat Ribbon Cable.

See also
GPIB Connector/
Address Switch Cables

GPIB Accessories


   
     
GPIB to Serial Interface boards for test systems and OEM applications