Click on the appropriate model to download the product data sheet. ICS's product data sheets are acrobat PDF files. If you do not have an acrobat reader, click on the acrobat reader link to download a free copy of the reader. Note: The 48x9A Models incorporate expanded Modbus command sets with 32-bit floating point commands and are fully backward compatible with the older 48x9 units. |
||
| 4899A | Also
see
Temperature Controller Ap Note AB48-25 LabView Drivers examples |
|
 |
4899A GPIB To Modbus RTU Interface controls serial Modbus RTU devices from the GPIB bus. The 4899A GPIB to modbus is packaged in our CE approved Minibox™ case and has RS-232 and RS-485 serial interfaces. The 4899A can drive up to 32 Modbus devices on a RS-485 network. Use with Watlow F4, EZ-Zone or similar Modbus RTU Controllers .Download the 4899A GPIB to Modbus data sheet as a PDF file. | |
| 4809A | ||
 |
4809A GPIB To Modbus Interface Board controls serial Modbus RTU devices from the GPIB bus. Provides RS-232 and RS-485 serial outputs. Can be mounted anywhere in a chassis. Has headers for connection to GPIB bus and to ICS's GPIB Connector/Address Switch Assemblies. Internal regulator accepts 5 to 15 Vdc power. Use with Watlow F4, EZ-Zone or similar Modbus RTU Controllers. Download the 4809A GPIB to Modbus data sheet as a PDF file. | See also: |
| 4819A | ||
 |
4819A GPIB To RS-232 Modbus Interface Board controls an RS-232 serial Modbus RTU device from the GPIB bus. The 4819A mounts on the rear panel of a chassis and give the user both RS-232 and GPIB control of a single modbus device. Operates on +5 to +15 Vdc. Use with Watlow F4 or similar Modbus RTU Controllers with RS-232 interfaces. Download the 4819A GPIB to Modbus data sheet as a PDF file. | |
| 4829A | ||
|
4829A GPIB To RS-485 Modbus Interface Board controls an RS-422 or RS-485 serial Modbus RTU device from the GPIB bus. The 4829A mounts on the rear panel of a chassis and give the user both RS-232 and GPIB control of up to 32 Modbus devices on an RS-422 or RS-485 network. Operates on +5 to +15 Vdc. Ideal for controlling Watlow EZ Zone or similar Modbus RTU controllers. Download the 4829A GPIB to Modbus data sheet as a PDF file. |  |
| GPIB To Modbus Interface - GPIB Modbus RTU Interface - 488.2 to Modbus - HP-IP to Modbus | ||