Model MG369x Confirmation Page

 

 

Your configuration values have been saved. Click Reboot for the changes to take affect now or power cycle the unit later to activate the changes.

You will have to relink to the unit after the reboot.
If you are unable to relink, power cycle the unit while shorting pin 19 of the AUX I/O connector to an available ground (pin 2, 8, or 24 of the AUX I/O connector or the metal chassis) for five seconds to restore the factory default settings. Refer to the Anritsu MG369xC Operation Manual for valid configuration settings.

   Reboot now

 

Last update 12-12-2012