Relay Driver Boards

ICS's Relay Driver Boards add 40, 64 and 128 Relay Drivers to ICS Digital Interface Boards. Relay Driver Boards are available for our popular 4803, 4813, 8003, 8013, 2303, 2313 and 2003 Parallel Interface Cards.

     

xx03DVR Relay Driver Boards

 
xx03DVR Relay Driver Board • 115490 Board version for 4803, 2303, 2003 and 8003 series Parallell Interface Boards with DIN connectors on the circuit side.

• Parallel Interfacel boards mount on top of the 115490 Relay Driver Board for a low mated height.

• Provides 40 high-current, sink-type relay drivers for 5 to 32 Volt relays.

• Use 8 or 16 of the output lines for TTL I/O.

• Powered with the external relay power supply.

• Provides 5 V power to the Parallel Interface Board.

• Order mating Parallel Interface Boards with their digital I/O connector mounted on the circuit side


xx03DVR Data Sheet


• 115522 Board version for standard 4803, 2303, 2003 and 8003 Digital Interface Boards with DIN connectors on the component side.

• Relay Driver board mounts on top of a standard Digital Interface Board for a higher mated profile.

• All other specifications are the same as listed above for the 115490 Board.

   

xx13DVR Relay Driver Board

 
xx13DVR Relay Driver Board • For standard 4813, 2313, and 8013 Digital Interface Boards.

• Relay Driver Board sits on top of the Digital Interface Boards.

• Provides 128 high-current, sink-type relay drivers for 5 to 32 Volt relays.

• Relay driver signals on four 36-pin flat-ribbon headers.

• One byte in each header can be direct TTL I/O lines.

• Powered with the external relay power supply.

• Provides 5 V power to the Digital Interface Board.
xx13DVR Data Sheet


Flat Ribbon Cable and Connectors
115156 Cable photo

115656-60 xx13DVR Ouput Cable connects the xx13DVR Board to a user's PC board. The 115656 flat ribbon cable has two 36-pin female plugs, one plugs into the male header on the xx13DVR Board and the other end plugs into a similar header on the user's PC board. Standard length is 60 cm.


902333 Flat Ribbon Header for soldering into the user's PC board. Mates with 115656 Cable.

902334 Flat Ribbon Socket crimps onto a 36 conductor flat ribbon cable. Use to make your own xx13DVR output cables.

   

DC-37 Relay Driver Board

 
DC-737 Relay Driver Board • For standard 4813, 2313, and 8013 Digital Interface Boards.

• Relay Driver Board sits on top of the Digital Interface Boards.

• Provides 64 high-current, sink-type relay drivers for 5 to 32 Volt relays.

• Provides 64 TTL I/O lines direct to the Digial Interface board.

• Four 37-pin D-sub connectors each with 16 relay drivers and 16 TTL I/O lines.

• Powered with the external relay power supply.

• Provides 5 V power to the Digital Interface Board.

DC-37 Relay Driver
Data Sheet


   
     
Relay Driver Boards with 40, 64 and 128 Relay Drivers for ICS Digital Interface Boards