ICS's Serial to GPIB Controller allows any computer with a serial port to control GPIB devices. Works with RS-232 and 2 or 4-wire RS-422/RS-485 signals. Use to add GPIB Capability to PLCs with serial ports.

Model 4895 Serial to GPIB Controller

Photo- 4895 Serial to GPIB Controller

• Adds GPIB Controller capability to any PC or PLC with a serial COM port.

• Works with RS-232 or RS-422/RS-485 signals and baud rates up to 38.4Kbaud.

• Uses HP Basic style commands to control instruments.

• Includes IEEE-488.2 FindLstn, AllSerialPoll and Reset Command protocols.

• Compatible with National Instruments 'CT' commands.

• Reverse G-Mode operates as a GPIB to Serial Interface.

• Includes interactive M95_kybd Control Utility for controlling instruments from the computer keyboard.

See also

Rack Mounting Kits

GPIB Cables


Use the following links to see our other GPIB Controllers and GPIB Accessories.

Ethernet to GPIB Gateway - USB GPIB Controller - PCI GPIB Card - PXI/cPCI GPIB Controller - Serial GPIB Controller
ISA Bus GPIB Card - GPIB Cables and Accessories

Serial to GPIB Controller, Serial GPIB, PLC to GPIB, PLC GPIB, GPIB Serial, RS-232 to GPIB Controller, RS-422 to GPIB Controller, RS-485 to GPIB Controller, RS232 gpib controller, rs485 gpib controller, NI CT replacement, GPIB PLC, PC to HP-IB